Description:
For Digital Bullet CCD - 1/3 Inch Sony Chip, 420TVL, Digital Bullet
New 1/3 Inch Sony Chip, 420TV Line, Digital Bullet, Security CCTV Wired Color CCD Camera with Adjustable Camera Bracket and 3.7mm Flat Pinhole Lens
Features:
For Digital Bullet CCD - 1/3 Inch Sony Chip, 420TVL, Digital Bullet
• Signal Format: PAL/NTSC
• Image Sensor: 1/3 Inch Sony CCD
• Effective Pixels: 768(H) x 494(V)-NTSC
• 752(H) x 582(V)-PAL
• Scanning System: NTSC: 525Lines, 60Field/Sec
• PAL: 625Lines, 50Field/Sec
• Sync System: Internal Synchronization
• Resolution: 420TVL
• S/N Ratio: More than 46dB (AGC off)
• Gamma Characteristic: 0.45
• Illumination Sensitivity: 0.5Lux, 0.01lux (Ex-view CCD)@F:2.0 (D: 0.5lux, N: 0.05lux
• Gain Control: Auto
• B.L.C.: Auto
• White Balance: Auto
• Electronic Shutter Speed: NTSC: 1/60-1/100,000Sec, PAL:1/50-1/100,000Second, Auto
• Video Output: 1Vp-p 75OMS, Negative
• Lens Type: 3.7mm Flat Pinhole Lens
• Power Supply: DC12V±10%
• Current Consumption: 130mA±10%
• Operating Temperature: -10°C~+50°C
• Storage Temperature: -20°C~+60°C
Certifications / Licence:
For Digital Bullet CCD - 1/3 Inch Sony Chip, 420TVL, Digital Bullet
• CE
• FCC
• RoHS
Warranty:
For Digital Bullet CCD - 1/3 Inch Sony Chip, 420TVL, Digital Bullet
• 12 months
Packaging Details:
For Digital Bullet CCD - 1/3 Inch Sony Chip, 420TVL, Digital Bullet
weight: 0.4kg
Remark:
For Digital Bullet CCD - 1/3 Inch Sony Chip, 420TVL, Digital Bullet
1. Any changes of modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
2. A regulated DC 12V 300mA power supply is recommended for use with this camera for the best picture and the most stable operation.
3. An unregulated power supply can cause damage to the camera. When unregulated power supply is applied, product warranty will be out of subject.
4. It is recommended that the camera is used with a monitor that has a CCTV quality 75 Video impedance level. If your monitor is switched to high impedance then please adjust accordingly. If the monitor does not have the impedance adjust switch, please ask us for a camera suitable for your monitor.
5. Do not attempt to disassemble the camera to gain access to the internal components. Refer servicing to qualified service personal.
6. Never face the camera towards the sun or spot light or light reflecting objects. Any bright light may cause smear on the picture and possible damage to the CCD.
7. Except the weather-proof camera, do not expose the camera to rain or moisture. Do not try to operate the camera in wet area. Moisture can damage the camera and can create the danger of electric shock.
8. Do not remove the serial sticker for the warranty service.
iPhone 2g Spare Parts
iPod Spare Parts
Security Products
